18w transparent shell t10 led tube light 3528smd

1.Luminous:100.3LM/W 2.AC180-240V/50-60HZ 3.Base:G5 4.Chip:Epistar 5.3 years warranty

Comparing with traditional fluorescent tubes, our high brightness t8 led tube can save 50% electricity cost. 8W, 10W,18W, 20W LED tubes can replace 20W, 28W,36W and 40W traditional fluorescent tubes. our t8 LED tubes do not need ballast or starter. It save another 8-13W.

Specification: 

Model Number	LP-T10RGD-12
Description	T10 fluorescent lamp
Power	18W
The number of chips	288PCS
Luminous Efficiency	96LM/W
Luminous Flux	1728LM
Voltage	AC180-240V/50-60Hz
Shell Material	Aluminum+fireproofing PC
lamination Distance	1M/2M
luminance values	LUX
Dimensions	L1200mm*W26mm*H32
	L900mm*W26mm*H32
	L600mm*W26mm*H32
color	White

LEDS Lumen Attenuation: 

Operating time(hours)	Lumen decrease(%)
5,000	2.4
10,000	5.2
20,000	11.3
50,000	24.5

Advantages:

1. our t8 led tube has various colors for customers to choose. It can be available in various in single color or RGB color.

2.We have the R&D department to support and can supply the products according to your design and requirements.

3.Energy saving ,saving 50% than the traditional lights at the same brightness.

4.Inner high efficiency(95%)heat protection system, with the latest high efficiency and constant currency driver, making the products can work under unstable voltage.

5.Professional circuit design, each LED can work separately, thus it can avoid the influence caused by a broken single LED.

6.Anti-electric wave,no RF interference.

Detailed features:1. There is no harsh glare, directly replacement for Traditional Fluorescent T8.2. Integrated thermal management system.3. Longlife time more than 50, 000 hours under normal use, especially for office lighting.4. Optimized light extraction system delivery high lumens.5. No RF interference, Lead free.6. Long lifetime - LED feature, reasonable driving, no effect from switch on/off.7. Green environment, without any harmful materials listed in RoHS.8. No need maintenance, long life of LEDs, no trouble of replace parts of narmal fluorescent tube.9. No flash, AC driving, stable light, protect eyes.10. Good color vision, color temperature can be adjusted from 3000K to 13000K.11. Easy mounting, can be mounted directly.12. No need accessories, no need traditional driving and reflector parts.13. Not easy broken, all materials from inner light sources and outer cases are hard materials, such as Epoxy, ABS, PC, 14. No electromagnetism interference, no high power switch and inductance parts, no environment electromagnetism pollution.15. High power complication, no transformer, without additional power consumption.CE&ROHS&PSE so the quality is superior .

Application:

1. Instead of the indoors ceiling light 2. Factories, Offices,School,Universities,Hosptial 3. Conference,Meeting room,Show Room 4. Commercial Complexes 5. Super-markets 6. Residential,Institution building

Installation

 The same size tube can be installed on to the corresponding lamp holder directly before taking

down fluorescent lamp starter.

1. Our t8 led tube can be directly installed into T8 or T10 bracket(take down fluorescent lamp starter);

2. LED tube light apply to inductive light holder.  Electronic ballast fluorescent tube can’t be replaced directly,should take down electronic ballast.